NRF24L01 2.4GHz wireless transceiver module

NRF24L01 2.4GHz wireless transceiver module
Click to enlarge

More images

Click to enlarge
Price: $2.49
Product ID : com-nrf24L01
E-mail to a friend

Purchase

Description

This mobule is base on Nordic Semiconductor nRF24L01 ultra low power 2.4GHz RF Transceiver IC

The nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery lifetime when running on coin cells or AA/AAA batteries. The Enhanced ShockBurst™ hardware protocol accelerator additionally offloads time critical protocol functions from the application microcontroller enabling the implementation of advanced and robust wireless connectivity with low cost 3rd-party microcontrollers.

The nRF24L01 integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller. No external loop filter, resonators, or VCO varactor diodes are required, only a low cost ±60ppm crystal, matching circuitry, and antenna.

Ultra low power consumption

  • 900nA deep sleep mode
  • 11.3mA Radio TX at 0dBm
  • 12.3mA Radio RX at 2Mbps on-air data-rate

2.4GHz Radio

  • 2.4GHz ISM band operation
  • GFSK modulation, 1 or 2MHz bandwidth
  • 0, -6, -12, and -18dBm programmable TX output power
  • Configurable on-air data rate of 1Mbps or 2Mbps
  • -82dBm RX sensitivity at 2Mbps
  • -85dBm RX sensitivity at 1Mbps
  • Compatible with a 16MHz ±60ppm crystal

Enhanced ShockBurst™ hardware protocol accelerator

  • Automatic packet assembly
  • (Preamble, Address, CRC)
  • Automatic packed detection and validation
  • Dynamic payload length, 1 to 32Bytes
  • Auto retransmit
  • Auto Acknowledgment with optional payload
  • 6 data pipe MultiCeiver™
  • 3 separate 32Byte TX and RX FIFOs

MCU Interface

  • SPI, up to 10Mbps

Power supply

  • Internal linear voltage regulator
  • 1.9 to 3.6V supply range

Source: http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01

Product Reviews

Login or Register to write the first review.